Netgear AirCard 801S (Clear 4G) – Clear Spot 4G plus for Clear 사용자 가이드
Your Device
Rev 1.0 Apr.10
33
Note: If you’re using Mac OS X 10.4.x, after you connect the device you may see a
warning message that your computer is running on UPS backup battery and that you
should perform a computer shutdown. You can continue with your work. To prevent this
message from being displayed, install the device driver. See
warning message that your computer is running on UPS backup battery and that you
should perform a computer shutdown. You can continue with your work. To prevent this
message from being displayed, install the device driver. See
1.
Ensure the computer is turned on.
2.
Insert the larger (USB) end of the USB cable into the computer.
3.
Insert the other (Micro B) end of the USB cable into the USB connector on
the side of the device.
the side of the device.
When charging, the LCD shows
.
When the device is charged, the LCD shows
.
Power Button
Turning Your Device On
1.
Ensure that:
· The device has a charged battery inserted.
· The device has a charged battery inserted.
— or —
· The device is connected to the power adapter or a computer (through the
· The device is connected to the power adapter or a computer (through the
USB cable), as shown in the drawing on
2.
If the device LCD is blank, press and hold the power button
for two
seconds.
Turning Your Device Off
•
Press and hold the power button
for 2 seconds.