Netgear AirCard 801S (Clear 4G) – Clear Spot 4G plus for Clear 사용자 가이드
Clear Spot 4G+ User Guide
34
2131352
Using the Power Button to Determine the Device State
The power button
on the device also indicates the device's status, as shown in
the following table.
Controlling the Device Using the Power Button
Power button
Description
Your action
Not lit
•
The device is turned off, and may or
may not be charging.
may not be charging.
•
The device is turned on, but you have
turned off the LED.
turned off the LED.
•
To turn the device on, press and hold the
power button
power button
for two seconds.
•
[OPTIONAL]: Turn on the LED. See
Lit, flashing
(approximately every
4 seconds)
(approximately every
4 seconds)
The device is turned on, and the LED is
enabled.
enabled.
No action required.
Lit, flashing
(approximately every
30 seconds)
(approximately every
30 seconds)
The device is in standby (low power) mode.
The following are off: LCD, Wi-Fi radio, 3G/
4G radios.
For more information, see
The following are off: LCD, Wi-Fi radio, 3G/
4G radios.
For more information, see
.
To exit standby mode:
Connect the device to the power adapter or
computer, through the USB cable.
— or —
Press the power button
Connect the device to the power adapter or
computer, through the USB cable.
— or —
Press the power button
.
Type of press
Result
Quick press
•
The device leaves standby (low power) mode.
•
The LCD wakes up (turns on) if it was enabled but dormant. (The LCD turns dark,
after a configurable time of inactivity.)
after a configurable time of inactivity.)
•
A displayed message is confirmed or acknowledged.
•
Display of the Wi-Fi network name (SSID) and password is turned off.
Quick double-press
•
The LCD wakes up (turns on) if it was enabled but dormant. (The LCD turns dark,
after a configurable time of inactivity.)
after a configurable time of inactivity.)
•
The Wi-Fi network name (SSID) and password are briefly displayed. See
Long press (press and hold
for two seconds)
for two seconds)
The device turns on or off.