Netgear AirCard 598U (Sprint) 사용자 가이드

This window is reached by clicking the Configure GPS Applications button on the Location/
GPS tab of the Settings window. It is nearly identical to the App Launcher settings tab 
described on pages 78 to 96 and configuring applications differs very little from one to the 
other. However the following differences should be noted:

●

The applications configured here are assumed to be GPS-aware (for example: mapping 
applications). If you are using the classic interface, such applications will appear in the 
GPS Bar rather than the Application Bar. If you are using the new interface, such 
applications appear in the GPS Applications Menu rather than the Application Launch 
Menu.

●

Unlike the App Launcher settings tab, the list here also contains search items. In the 
classic interface, these appear as additional icons on the GPS Bar. In the “new” interlace, 
these appear in the GPS Search Menu. Note, however, that you cannot add new search 
items in this window. If you are using the new interface, you can add new search items by 
typing them into the box at the top of the GPS Search Menu.

●

GPS applications must be assigned an NMEA port (see “GPS/NMEA COM Ports” on 
page 98). Sprint SmartView uses this port to send the data generated by your GPS 
receiver to the application.

●

As a result of the above differences, the procedure to add a new GPS applications differs 
somewhat from the process described on page 79. See “Adding a GPS Application to 
the GPS Applications Window” on page 100 for the GPS-specific version of this 
procedure.