Netgear AirCard 598U (all others) 설치 가이드
USB 598 modem - User Guide
18
2131175
Installing the modem and software
To install Watcher and the modem drivers:
1.
If your computer has an AirPort
®
, AirPort Extreme
®
, AirPort Express
®
, or
Bluetooth adapter, turn it off. (For instructions, see the user guide of your
computer).
computer).
2.
Remove the protective cap from the USB connector of the modem.
Note: Do not forcefully
insert the modem. This
may damage the
connector pins.
insert the modem. This
may damage the
connector pins.
3.
Gently insert the modem into the USB slot. Alternatively:
· You can attach the USB extension cable (included in your package) to your
· You can attach the USB extension cable (included in your package) to your
computer’s USB slot, connect the modem and laptop clip to the USB
extension cable, and then attach the laptop clip to the top of your laptop’s
screen (see page 19 through page 20).
extension cable, and then attach the laptop clip to the top of your laptop’s
screen (see page 19 through page 20).
Note: If your computer’s USB slot is vertical, use the supplied USB extension cable and
laptop clip.
Do not insert the modem or the USB extension cable into a USB hub or, if your keyboard is
separate from your laptop, a USB slot on your keyboard.
laptop clip.
Do not insert the modem or the USB extension cable into a USB hub or, if your keyboard is
separate from your laptop, a USB slot on your keyboard.
Warning:
If the orientation of your computer’s USB slot or the thickness of your
computer are such that pressure is applied to the modem’s end or side (as shown by the
red circle in the drawing below), you may damage the modem or your computer. In such
cases, do not insert the modem directly into your computer’s USB slot; use the supplied
USB extension cable and the supplied laptop clip instead (see
red circle in the drawing below), you may damage the modem or your computer. In such
cases, do not insert the modem directly into your computer’s USB slot; use the supplied
USB extension cable and the supplied laptop clip instead (see
).
4.
In the window that appears, double-click
Watcher Installer.mpkg
.
5.
In the “Welcome to the Sierra Wireless Watcher Installer” window, click
Continue
.
6.
Read the agreement displayed in the “Software License Agreement” window,
and click
and click
Continue
.
7.
Click
Agree
to accept the agreement and to continue with the software instal-
lation.
8.
If the “Select a Destination” window is displayed, select a destination volume
to install the software, and click
to install the software, and click
Continue
.
9.
In the “Standard Install on ...” window, click
Install
.
10. If a window appears, prompting you to enter your password, enter your Mac
password, and then click
OK
.
11. In the window with the message that you will have to restart your computer,
click
Continue Installation
.