Netgear MBR1200 - HSPA+ Mobile Broadband Wireless Router 사용자 설명서

Internet Port Internet LED is red.

The router cannot connect to the Internet. Check the Internet connection 
option being used.

For the mobile broadband connection option, check the Signal LED.

For the Ethernet connection option, check the WAN LED.

Internet LED is 
blinking red and 
green.

The Traffic Meter feature is enabled, and the limit set has been reached. 

Wi-Fi

Wi-Fi LED is off.

The Wi-Fi radio has been turned off. If you want a Wi-Fi connection with the 
router, push the Wi-Fi button to turn the Wi-Fi radio back on.

Wi-Fi LED is not 
blinking.

If this LED does not blink when you are attempting to send data over the 
Wi-Fi link, log in to the router menu using the Ethernet LAN connection and 
check your router’s wireless (Wi-Fi) configuration.

LAN Ports

LAN LED is off.

If this LED does not light when an Ethernet connection is made, check the 
following:

Make sure that the Ethernet cable connections are secure at the router 

and at the hub or workstation.

Make sure that power is turned on to the connected hub or workstation.

WAN Port

WAN LED is off.

If this LED does not light when an Ethernet connection is made using the 
Ethernet connection option, check the following:

Make sure that the Ethernet cable connections are secure at the router 

and at the modem.

Make sure that power is turned on to the modem.

2G/3G

2G/3G LED is off.

The router cannot tell if the mobile broadband connection uses 2G or 3G 
signals.

Signal

Signal LED of off.

If this LED does not light when the Mobile Broadband connection option is 
used, check the following:

Check with your ISP to ensure that there is good coverage in the area.

Ensurethat your mobile broadband account is active.

Ensure that the SIM card is inserted correclty into the router.

Locate the router near the window or other area of the building. Make 

sure that the Signal LED is lit, indicating that there is mobile broadband 
coverage with the router.

Log in to the router menu and check your router’s Internet configuration. 

Check that the user name, password, and APN with ISP are set 
correctly. If you use a PIN to connect to the Internet, make sure that it 
is entered correctly.