Netgear DC112A – AirCard Smart Cradle 사용자 설명서



Lift the mobile hotspot out of the AirCard 
Smart Cradle.

Docking the mobile hotspot for the first 
time aligns the connectors, so the unit 
might be stiff going in and out.

If the mobile hotspot is difficult to lift, gently 
wiggle it side to side to disconnect it from 
the AirCard Smart Cradle.

When you remove the mobile hotspot 
from the Smart Cradle, the Smart Cradle 
loses its Internet connection, but it can be 
used as a WiFi router. The mobile hotspot 
enables its own WiFi again after being 
undocked so that you can connect to the 
mobile hotspot WiFi.

The cradle lets you access your network anywhere within the operating range of your 
wireless network. However, the operating distance or range of your wireless connection can 
vary significantly depending on the physical placement of your cradle. For example, the 
thickness and number of walls the wireless signal passes through can limit the range. 

Additionally, other wireless access points in and around your home might affect your cradle’s 

signal. Wireless access points are routers, repeaters, WiFi range extenders, and any other 
devices that emit a wireless signal for network access.



Position your cradle according to the following guidelines:

Place your cradle near the center of the area where your computers and other devices 
operate, and within line of sight to your wireless devices.

Make sure that the cradle is within reach of an AC power outlet and near Ethernet cables 
for wired computers.

Place the cradle in an elevated location, minimizing the number walls and ceilings 
between the cradle and your other devices.

Place the cradle away from electrical devices such as these:

Ceiling fans

Home security systems

Microwaves