Netgear DC112A – AirCard Smart Cradle 사용자 설명서

Computers

Base of a cordless phone

2.4 GHz cordless phone

Place the cradle away from large metal surfaces, large glass surfaces, and insulated 
walls such as these:

Solid metal doors

Aluminum studs

Fish tanks

Mirrors

Brick

Concrete



Place the cradle in your preferred location.

Connect the Smart Cradle’s power adapter and plug it into an electrical outlet.

The Power LED lights green within one minute. If the Power LED does not light, press the 
Power On/Off button on the rear panel of the cradle.

The cradle’s internal fan turns on momentarily when the cradle is powering up and then 
turns off.

After power up, the cradle’s internal fan turns on only when the cradle 
senses high temperatures of 40C (104

° 

F) or higher. This might 

happen during continuous high-data rate transmissions or if the cradle 
is in a warm location. The fan protects the mobile hotspot and the 
cradle from high temperatures. Once the mobile hotspot and cradle 
temperatures return to lower levels, the fan switches off.

Dock the mobile hotspot in the cradle.

See 

Check the cradle’s Internet LED.

When the cradle detects your mobile hotspot’s Internet connection, the Internet LED 
lights green and the Smart Cradle uses the mobile hotspot’s Internet connection. The 
mobile hotspot Internet service account must be active.

When your mobile hotspot detects that it is docked, the mobile hotspot LCD and home 
page indicate that it is docked in the Smart Cradle. The mobile hotspot uses the Smart 
Cradle’s more powerful internal 3G/4G antennas for better network coverage and 
charges itself through the Smart Cradle.