Netgear MBR1310 사용자 설명서

Wireless Network Configuration

NETGEAR Mobile Broadband 11n Wireless Router MBR1310

Configure WEP

Note:

If you use a wireless computer to configure wireless security

settings, you will be disconnected when you click Apply. Reconfigure
your wireless computer to match the new settings, or access the
router from a wired computer to make further changes.



To configure WEP data encryption:

Log In to Your Router

on page 12.

From the main menu, select Wireless Settings to display the Wireless Settings screen.

In the Security Options section, select the WEP (Wired
Equivalent Privacy) radio button:

Select the Authentication Type setting: Automatic,
Open System, or Shared Key. The default is Open
System.

Note:

The authentication is separate from the data

encryption. You can select authentication that
requires a shared key, but still leaves data
transmissions unencrypted. Security is stronger if
you use both the Shared Key and WEP encryption
settings.

Select the Encryption Strength setting:

•

64-bit. Use 10 hexadecimal digits (any

combination of 0–9, a–f, or A–F).

•

128-bit. Use 26 hexadecimal digits (any combination of 0–9, a–f, or A–F).

Enter the encryption keys. You can manually or automatically program the four data
encryption keys. These values have to be identical on all computers and access points in
your network:

•

Passphrase. To use a passphrase to generate the keys, enter a passphrase, and

click Generate. This automatically creates the keys. Wireless stations have to use the
passphrase or keys to access the router.

Note:

Not all wireless adapters support passphrase key generation.

•

Key 1

–

Key4. These values are not case-sensitive. You can manually enter the four

data encryption keys. These values have to be identical on all computers and access
points in your network. Enter 10 hexadecimal digits (any combination of 0

–

9, a

–

f, or

–

F).