Netgear MBR1310 사용자 설명서

If your wireless network will include a combination of WPS-capable devices and 

non-WPS-capable devices, NETGEAR suggests that you set up your wireless network 
and security settings manually first, and use WPS only for adding WPS-capable devices. 

WPS Button 

Any wireless computer or wireless adapter that will connect to the router wirelessly is a client. 
The client has to support a WPS button, and has to have a WPS configuration utility, such as 
the NETGEAR Smart Wizard or Atheros Jumpstart.



Log in to the router as described in 

on page 12.

On the router main menu, select Add 
WPS Client, and then click Next. 

WPS
button

By default, the Push Button 
(recommended) radio button is 
selected.

Either click the onscreen button or 
press the WPS button on the front of 
the router.

The router tries to communicate with the client (the computer that wants to join the 
network) for 2 minutes.

Go to the client wireless computer, and run a WPS configuration utility. Follow the utility’s 
instructions to click a WPS button.

Go back to the router screen to check for a message.

The router WPS screen displays a message 
confirming that the client was added to the 
wireless network. The router generates an 
SSID, and implements WPA/WPA2 wireless 
security. The router will keep these wireless 
settings unless you change them, or you 
clear the Keep Existing Wireless Settings 
check box in the Advanced Wireless Settings 
screen, WPS Settings section.

Note the new SSID and WPA/WPA2 
password for the wireless network. You can 
view these settings in the Wireless Settings 
screen. See 

To access the Internet from any computer connected to your router, launch a browser such 
as Microsoft Internet Explorer or Mozilla Firefox. You should see the router’s Internet LED 
blink, indicating communication to the ISP.