Netgear MBR1310 사용자 설명서

Because the USB port on the router is used for connecting the 

broadband mobile modem cable, you are not able to use the USB 
port for both a ReadyShare storage and a broadband mobile 
Internet connection at the same time even when using a USB hub to 
fan out the USB port.

This chapter includes the following sections:

USB Drive Requirements

The router works with 1.0 and 1.1 (USB full speed) and 2.0 (USB high speed) standards. The 
approximate USB bus speeds are shown in the following table.

Actual bus speeds can vary, depending on the CPU speed, memory, speed of the network, 
and other variables. The router should work with USB 2.0-compliant or 1.1-compliant 
external flash and hard drives. For the most up-to-date list of USB drives supported by the 
router, go to 

.

When selecting a USB device, bear in mind the following: 

The USB port on the router can be used with one USB hard drive at a time. Do not 

attempt to use a USB hub attached to the USB port.

According to the USB 2.0 specification, the maximum available power is 5V at 0.5A. 

Some USB devices might exceed this requirement, in which case the device might not 
function or might function erratically. Check the documentation for your USB device to be 
sure.

The router supports FAT, FAT32, NTFS, and Linux file systems. 

USB 1.1

12 Mbits

USB 2.0

480 Mbits