Netgear MBR1310 사용자 설명서
Connecting to the Internet
8
NETGEAR Mobile Broadband 11n Wireless Router MBR1310
Router Front Panel
The router front panel shown in the following figure contains control buttons and status LEDs.
You can use the LEDs to verify status and connections. The following table lists and
describes each LED and button on the front panel of the router.
describes each LED and button on the front panel of the router.
Button/LED
Activity
Description
WPS
Press this button to open a 2-minute window for the router to connect with other WPS-enabled
devices. For more information about using the WPS method to implement security, see
devices. For more information about using the WPS method to implement security, see
WiFi
Turn the mobile broadband and WiFi radios in the router on and off. Use the user interface to
select whether the mobile broadband radio or the WiFi radio or both radios will be controlled by
this button. The default is the WiFi radio only. Both radios are on by default.
select whether the mobile broadband radio or the WiFi radio or both radios will be controlled by
this button. The default is the WiFi radio only. Both radios are on by default.
USB
Solid green
A USB port has detected a USB device.
Blinking green
Data is being transmitted or received.
Off
No link is detected on these ports.
Power/Test
Signal Quality
LAN
2G/3G
WPS
Internet
ACT
WAN
WiFi
USB