Netgear MBR1310 사용자 설명서

Power/Test

Solid green

The router is powered on and operating normally.

Solid amber

POST (power-on self-test) in progress.

Off

Power is not supplied to the router.

Restore Factory Settings 
button

Press the Restore Factory Settings button for 6 seconds. The 
Power LED lights briefly. When the button is released, the LED 
blinks red three times and then turns green as the router resets to 
the factory defaults.

Internet

Solid green

There is an Internet session.

Solid red

There is no Internet connection.

Blinking green

Data is being transmitted over the Internet connection.

Blinking green and red

Traffic meter limit has been reached.

Off

No Internet connection detected or device in bridge mode.

WiFi

Solid blue

The WiFi local port is initialized.

Blinking blue

Data is being transmitted or received over the WiFi link.

Off

The wireless access point is turned off. 

ACT

Solid green

The local Ethernet ports have detected wired links with computers.

Blinking

Data is being transmitted or received.

Off

No link is detected on these ports.

WAN

Solid green

The Ethernet WAN port has detected an active link.

Blinking

Data is being transmitted or received.

Off

No link is detected on this port.

2G/3G

Solid blue

The router is in 3G+ coverage.

Solid green

The router is in 2G coverage.

Off

No mobile broadband coverage is detected.

Signal Quality

Solid blue

Excellent mobile broadband coverage detected.

Solid green

Good mobile broadband coverage detected.

Solid amber

Marginal mobile broadband coverage detected.

Off

No mobile broadband coverage detected.