Netgear WNR2200 - N300 Wireless Router 설치 가이드

Configuring Your Wireless Network

19

After installing your router, you must log into the router to complete your wireless setup. When 
you log in to the browser, you will be prompted to check for firmware updates from the 
NETGEAR update server. 

The Smart Wizard only appears when you run the CD. If you want to change the settings after 
installing and configuring your router, you can click the desktop shortcut—a pre-configured 
shortcut 

 placed on your desktop by the Smart Wizard at installation—to open the router 

management interface.

1

 You can also change your settings, or configure your wireless and security 

settings, by opening a browser window and logging in to the router. You will also be prompted to 
check for new router firmware for the router. 

Open a browser window and type http://www.routerlogin.net in the address field of your 
browser. Press Enter.

When prompted, enter the Password (

 is the default router User Name and 

 is 

the default router Password), both in lowercase letters. If you changed the Password from the 
defaults, then enter your new Password.

1. The shortcut icon is installed on your desktop only when using the Smart Wizard installation method.

You can enter either of these addresses to connect to your wireless router: 

http://www.routerlogin.net or http://www.routerlogin.com.

The router User Name and Password are unique to the router and are not the 
same as any other User Name or Password you may use to log in to your 
Internet connection.