Netgear WAG511 - Dual Band Wireless PC Card - 802.11a/b/g 사용자 설명서

2-4

The WAG511 Smart Wireless Utility uses profiles to store all the settings for a particular wireless 
network. There are two special profile names: Default and Profile. 

Default: The Profile named Default automatically scans for any available network. You cannot 
change this profile name. 

Profile: If you do not enter a name in the Profile Name box, then the name Profile is used to save 
your settings. If you do this more than once then you will be asked if you want to replace the 
previous settings stored in Profile.

You can store multiple profiles and recall the one which matches the network you want to join.

If you use your computer to connect to different wireless networks, you can create a profile for 
each wireless network. Then, you can easily load the profile that has all the settings that you need 
to join the network you are using at the time. 

There are two types of wireless network profiles that you can set up:

•

Access Point (Infrastructure) – connect to an access point or router with the 802.11 
infrastructure mode.

•

Computer-to-Computer (Ad Hoc) – connect directly to another computer with the 802.11 ad 
hoc mode.

For more information on 802.11 wireless network modes, see the wireless reference document at: