Netgear WAG511 - Dual Band Wireless PC Card - 802.11a/b/g 사용자 설명서

2-5

To set up the WAG511 Wireless PC Card to connect to a wireless access point or router: 

1. Use the 

 icon to open the Smart Wireless Utility. The Settings page opens.

2. Enter the profile name, Network Name (SSID) and make sure that Access Point 

(Infrastructure) is selected.

3. Click Save Profile to save the settings, and then click Apply. Click Close to exit the wizard, or 

Cancel to return to the previous settings.

4. Verify wireless connectivity to your network.

Use a browser to connect to the Internet, or check for file and printer access on your network. 
You can check the Status bar in the Smart Wireless Utility for the current connection status.

Note: You will not get a wireless network connection unless the SSID that you enter 

exactly matches the SSID used by the access point.

Note: If you cannot connect, see 

. For problems with 

accessing network resources, the Windows Client and File and Print Sharing 
software might not be installed and configured properly on your computers. 
See the link to 

.