Netgear WNR3500Lv2 - N300 Wireless Gigabit Router 사용자 설명서

If you use a wireless computer to change the wireless network name (SSID) or other wireless 
security settings, you are disconnected when you click Apply. To avoid this problem, use a 
computer with a wired connection to access the router.

On the Basic Home screen, select 

Wireless to display the Wireless Settings screen.

You can scroll down to view more settings. The screen sections, settings, and procedures 
are explained in the following sections.

Make any changes that are needed, and click 

Apply to save your settings.

Set up and test your wireless devices and computers to make sure that they can connect 

wirelessly. If they do not, check the following:

Is your wireless device or computer connected to your network or another wireless 

network in your area? Some wireless devices automatically connect to the first open 
network (without wireless security) that they discover.

Does your wireless device or computer show up on the Attached Devices screen? If it 

does, then it is connected to the network.

If you are not sure what the network name (SSID) or password is, look on the label on 

the bottom of your router.

Wireless Settings Screen Fields

Enable SSID Broadcast. This setting allows the router to broadcast its SSID so wireless 

stations can see this wireless name (SSID) in their scanned network lists. This check box is 
selected by default. To turn off the SSID broadcast, clear the 

(SSID) check box, and click Apply.
Enable Wireless Isolation. If this check box is selected, then wireless clients (computers or 

wireless devices) that join the network can use the Internet, but cannot access each other or 
access Ethernet devices on the network.