Netgear WNR2500 - N450 Wireless Router 사용자 설명서
genie BASIC Settings
33
N450 Wireless Router WNR2500
WEP
Wired Equivalent Privacy (WEP) security is an authentication and data encryption mode that
is superseded by WPA-PSK and WPA2-PSK. WEP supports speeds of up to 54 Mbps and
does not function with WPS. However, if you set up a wireless distribution system (see
is superseded by WPA-PSK and WPA2-PSK. WEP supports speeds of up to 54 Mbps and
does not function with WPS. However, if you set up a wireless distribution system (see
Note:
The WEP option displays only if you select Up to 54 Mbps from the
Mode list.
Mode list.
To configure WEP security:
1.
Select BASIC > Wireless.
2.
In the Security Options sections of the Wireless Settings screen, select the WEP radio
button.
button.
3.
In the Authentication Type list, select one of the following types:
•
Automatic. If you enter a passphrase in the Passphrase field and click the Generate
button, the four keys are automatically generated.
•
Shared Key. If you select this option, you must select one key and enter the value
manually.
manually.
4.
In the Encryption Strength list, select the encryption key size:
•
64-bit. Standard WEP encryption, using 40/64-bit encryption.
•
128-bit. Standard WEP encryption, using 104/128-bit encryption. This selection
provides higher encryption security.
provides higher encryption security.
5.
Depending on the authentication type, generate the key automatically or enter it manually:
•
If the authentication type is Automatic:
a. In the Passphrase field, enter a passphrase: