Netgear WNR2500 - N450 Wireless Router 사용자 설명서

Configure the IP address settings for the router:

Get dynamically from existing router. By default, the Get dynamically from existing 
router radio button is selected, enabling the router to receive its IP address and other 
IP settings from the other router or gateway in your network. 

Use fixed IP Address. To set up static IP address settings, select the Use fixed IP 

Address radio button.

NETGEAR does not recommend this setting.

When the other router or gateway in your network has wireless 
capability, NETGEAR recommends that you use wireless settings 
that are different from those settings on the other router or gateway 
to avoid interference. You could also disable the wireless radio on 
the other router or gateway and use your router only for wireless 
client access.

Click the Apply button.

When you click the Apply button, the IP address of the router 
changes and you are disconnected. To reconnect, close and restart 
your web browser, and type http://www.routerlogin.net.

You can set up the router to be used as a wireless base station or wireless repeater in a 
wireless distribution system (WDS). A WDS lets you expand a wireless network through 
multiple access points instead of using a wired backbone to link them. A wireless base station 
connects to the Internet, can have wired and wireless clients, and sends its wireless signal to 
an access point that functions as a wireless repeater. A wireless repeater can also have 
wired and wireless clients, but connects to the Internet through the wireless base station.