Netgear WNR2500 - N450 Wireless Router 사용자 설명서

To activate the schedule, select the Turn off wireless signal by schedule check box.

Click the Apply button.

You can control how WPS functions on the router. NETGEAR recommends that you use 
caution when changing the WPS settings.

For information about how to use WPS to add wireless devices and 
other equipment to your wireless network, see 

24.

You cannot set up the WPS settings when the security is WEP. Make sure that the security 
mode is WPA-PSK, WPA2-PSK, or WPA-PSK + WPA2-PSK mixed mode. For information 
about configuring the security mode, see 

28.

You can do the following with the router’s PIN:

Disable the PIN entirely.

Change the number of times that a PIN connection is allowed to fail before the PIN is 
automatically disabled. By default, the PIN is automatically disabled after three failed 
connection attempts. If the PIN is automatically disabled, it remains so until you restart 
the router. While the PIN is disabled, the WPS LED blinks slowly.

Turn off automatic disabling of the PIN. 



Select ADVANCED > Advanced Setup > Wireless Settings.

The Advanced Wireless Settings screen displays.

The router’s PIN is shown for information only. You cannot change it.

To disable the router’s PIN entirely, clear the Enable Router’s PIN check box. 

By default, the PIN is enabled, but there might be situations in which you want to disable 
the PIN.

To change the number of times that a PIN connection can fail, under the Enable Router's 
PIN check box, type a number in the field.

You can change this setting only when the PIN is enabled. By default, the number is 3.

To turn off automatic disabling of the PIN, clear the check box under the Enable Router’s 
PIN check box.

You can change this setting only when the PIN is enabled. By default, automatic disabling 
of the PIN is turned on.

Clear the Keep Existing Wireless Settings check box.