Netgear WNR2200 - N300 Wireless Router 사용자 설명서

Safeguarding Your Network

2-14

The wireless router WPS screen displays a message confirming that the client was added to the 
wireless network. The wireless router generates an SSID, and implements WPA/WPA2 
wireless security. The wireless router will keep these wireless settings unless you change 
them, or you clear the Keep Existing Wireless Settings check box in the WPS Settings 
screen.

6. Note the new SSID and WPA/WPA2 password for the wireless network. You can view these 

settings in the Wireless Settings screen. See 

.

To access the Internet from any computer connected to your wireless router, launch a browser such 
as Microsoft Internet Explorer or Mozilla Firefox. You should see the wireless router’s Internet 
LED blink, indicating communication to the ISP.

Any wireless computer or wireless adapter that will connect to the wireless router wirelessly is a 
client. The client must support a WPS PIN, and must have a WPS configuration utility, such as the 
NETGEAR Smart Wizard or Atheros Jumpstart.

The first time you add a WPS client, make sure that the Keep Existing Wireless Settings check 
box on the WPS Settings screen is cleared. This is the default setting for the wireless router, and 
allows it to generate the SSID and WPA/WPA2 security settings when it implements WPS. After 
WPS is implemented, the wireless router automatically selects this check box so that your SSID 
and wireless security settings remain the same if other WPS-enabled devices are added later.

Note: If no WPS-capable client devices are located during the 2-minute time frame, the 

SSID will not be changed, and no security will be implemented on the wireless 
router.