Netgear WN2000RPTv2 - Universal WiFi Range Extender 사용자 설명서

Advanced Wireless Settings

The extender is already configured with the optimum settings. Do not alter these settings 
unless directed by NETGEAR support. Incorrect settings might disable the extender 
unexpectedly.



From the extender menu at http://www.mywifiext.net, under the Advanced heading, select 
Wireless Settings. The following screen displays:

You can view or configure the following settings:

Enable Wireless Access Point. Enable the extender to work as a wireless access point. 

If this check box is cleared, then computers or wireless devices cannot connect wirelessly 
to the extender.

Enable SSID Broadcast. Enable the extender to broadcast its wireless network name 

(SSID). If this check box is cleared, then the wireless network is hidden. To join a hidden 
wireless network, you have to type the wireless name.

Disable Device’s PIN. Selecting this check box disables the extender’s PIN. The PIN 

can be used for a WPS wireless connection.

Keep Existing Wireless Settings. When this check box is selected, the settings in the 

Wireless Settings screen stay the same when WPS is used for a wireless connection.

Setup Access List. Specify a list of computers or wireless devices that are allowed to 

connect to the network. If you use an access list, then computers that are not on the list 
are not allowed to join the wireless network.