Netgear WN2000RPTv2 - Universal WiFi Range Extender 사용자 설명서

A workable performance is delivered when the Link Rate LED is amber 

 

and the 

PC to Extender Connection LED 

 

is green.

If you cannot get a wireless connection working, you can use an Ethernet cable to 
connect your computer to the extender. See 

8.

Joining Wireless Networks

To join a wireless network you must know its network name (also called the SSID) so that you 
can select it. If the network is secure, you must know the passphrase or wireless key. If the 
extender does not connect to the network that you chose, the following message displays:

If this happens it could be due to one of these reasons:

The network name, passphrase, or key might have been typed incorrectly. Click Cancel, 

use the Smart Wizard to select the network from the list, and retype the passphrase or 
key. This is case-sensitive. PASSWORD25 is not the same as Password25 or 
password25. See 

10.

If the Smart Wizard does not find your wireless network (it is not displayed in the Select 

Existing Network screen), check to see if your wireless network is still up and running. 
Make sure that the router is turned on. If possible, move the extender closer to the router 
and click Try Again. 

If the extender WLAN LED is red, this indicates a poor wireless connection. The best 

connection is established when there is a clear line of sight between the extender and the 
router you are connecting to. Make sure that there are no physical obstacles between the 
extender and the router, and try to move the extender closer to the router.

If you use the Smart Wizard, and the extender cannot connect to the router or cannot get an 
IP address from the router, it displays the following message:

If you click Continue, the Smart Wizard starts again (see 

10). 

If you click Exit, the Status screen displays with menu selections on the left (see 

9).