Netgear PR2000 - Trek N300 Travel Router and Range Extender 사용자 설명서
Troubleshooting
136
Trek N300 Travel Router and Range Extender PR2000
3.
Enter the Trek user name and password.
The user name is admin. The default password is password. The user name and
password are case-sensitive.
password are case-sensitive.
4.
Click the OK button.
The BASIC Home screen displays.
5.
Select Administration > Router Status.
6.
Click the Connection Status button. If the fields display the correct IP address and time
information, your PPPoE connection is working.
If any of the fields indicate failure, you can attempt to reconnect by clicking the Renew
button. The Trek continues to attempt to connect indefinitely.
button. The Trek continues to attempt to connect indefinitely.
If you cannot connect after several minutes, you might be using an incorrect service name,
user name, or password. Or your ISP might have a provisioning problem.
user name, or password. Or your ISP might have a provisioning problem.
Note:
Unless you connect manually, the Trek does not authenticate using
PPPoE until data is transmitted to the network.
PPPoE until data is transmitted to the network.
Troubleshoot Internet Browsing
If your Trek can obtain an IP address but your computer cannot load any web pages from the
Internet, check the following:
Internet, check the following:
•
Your computer might not recognize any DNS server addresses. A DNS server is a host
on the Internet that translates Internet names (such as www addresses) to numeric IP
addresses.
on the Internet that translates Internet names (such as www addresses) to numeric IP
addresses.