Cisco Cisco Configuration Assistant 2.x 관리 매뉴얼

Static Routing

Cisco Configuration Assistant SBCS Administrator Guide

189

 

•

A static route is hard-coded into the static routing table of the device, so any 
static route that you configure is not removed from the routing table until 
you delete it or replace it. 

•

A static route has priority over all dynamic routes and reduces processing 
time by quickly determining the path for a packet. Dynamic routes are 
learned by the device by using IP routing protocols such as RIP, require 
more processor time, and age out of the routing table if they are not 
refreshed.

On the UC500, a static route is created to 10.1.10.1, the Integrated-Service-Engine-
0/0 interface, which is the Cisco Unity Express (CUE) module. Do not delete this 
route.

Begin by selecting the device to be configured from the Hostname list. 

•

To add a static route, click Add, and use the Add Static Route window. See 

•

To delete a static route, choose the static route to be removed, then click 
Delete.

Click OK to close the window.

This window appears when you click Add on the Static Routing window. 

To add a static route to a router, configure settings as described below, then click 
OK to close the window and save your changes.

Enter the IP address of the destination network. 

Enter the subnet mask of the destination network.