Cisco Cisco IPICS Release 2.1 중요 안전 수칙
Cisco, Cisco Systems, the Cisco logo, and the Cisco Systems
logo are registered trademarks or trademarks of
Cisco Systems, Inc. and/or its affiliates in the United States
and certain other countries. All other trademarks
mentioned in this document or Website are the property of
their respective owners. The use of the word partner does
not imply a partnership relationship between Cisco and any
other company. (0705R)
logo are registered trademarks or trademarks of
Cisco Systems, Inc. and/or its affiliates in the United States
and certain other countries. All other trademarks
mentioned in this document or Website are the property of
their respective owners. The use of the word partner does
not imply a partnership relationship between Cisco and any
other company. (0705R)
© 2007 Cisco Systems, Inc. All rights reserved.
78-17779-02
Printed in the USA
DOC-7817779=
Q
UICK
S
TART
Cisco IPICS Server
Installation
Installation
General Installer Information
You install two Cisco IPICS software
components:
components:
•
Cisco IPICS operating system
software—This installation is
GUI-based, and you install this
software from a directly-connected
console terminal
software—This installation is
GUI-based, and you install this
software from a directly-connected
console terminal
•
Cisco IPICS server software—This
installation is text-based, and you
install this software from a console
terminal or a remote console
installation is text-based, and you
install this software from a console
terminal or a remote console
Preinstallation Tasks
Perform the following preinstallation tasks
before you install Cisco IPICS:
before you install Cisco IPICS:
•
Check that you have both CDs from the
Cisco IPICS installation package.
Cisco IPICS installation package.
•
Attach an Ethernet network cable to the
NIC1 (eth0) port on your server.
NIC1 (eth0) port on your server.
•
Obtain the IP address, subnet mask,
default gateway, and DNS server
information for the Cisco IPICS server.
default gateway, and DNS server
information for the Cisco IPICS server.
•
Obtain multicast IP addresses for
channels/virtual talk groups (VTGs).
channels/virtual talk groups (VTGs).
•
Obtain IP addresses for the router
media service (RMS) interfaces.
media service (RMS) interfaces.
•
Use the included short-length loopback
cables to connect the T1/E1 interfaces
of the RMS.
cables to connect the T1/E1 interfaces
of the RMS.
•
If you use the Cisco IPICS policy
engine, obtain the IP address, SIP
listening port, and preferred transport
type of your SIP provider.
engine, obtain the IP address, SIP
listening port, and preferred transport
type of your SIP provider.
•
If your network uses the Network Time
Protocol (NTP), obtain the IP address
or DNS name of the NTP server.
Protocol (NTP), obtain the IP address
or DNS name of the NTP server.
Installing the Cisco IPICS
Operating System Software
Operating System Software
Be aware of the following caveats when you
install the Cisco IPICS operating system
software.
install the Cisco IPICS operating system
software.
•
If you are installing Cisco IPICS on a
Cisco media convergence server (MCS)
7825, you must disable SATA software
RAID and Virtual Install Disk by
pressing F10 while the system is
booting.
Cisco media convergence server (MCS)
7825, you must disable SATA software
RAID and Virtual Install Disk by
pressing F10 while the system is
booting.
•
If the Kudzu hardware detection
window displays, press Configure to
configure the interfaces, Intel SATA
controller, or Intel IDE controller, as
prompted.
window displays, press Configure to
configure the interfaces, Intel SATA
controller, or Intel IDE controller, as
prompted.
For More Information
For additional information about the
Cisco IP Interoperability and Collaboration
System (Cisco IPICS) server installation
and upgrade procedures, refer to the
Cisco IP Interoperability and Collaboration
System (Cisco IPICS) server installation
and upgrade procedures, refer to the
Cisco IPICS Server Installation and
Upgrade Guide, Release 2.1(1)
Upgrade Guide, Release 2.1(1)
.
Refer to the following URL for the
complete Cisco IPICS documentation set:
complete Cisco IPICS documentation set: