IBM 3000VA LCD 3U Rack UPS (230V) 53953KX 사용자 설명서

IBM 3000VA LCD 3U Rack Uninterruptible Power Supply for IBM System x

4

Features

The IBM 3000VA LCD 3U Rack UPS includes the following features and capabilities:

Occupies only 3U of vertical rack space.



Energy efficient at over 95% at 100% load.



Offers six, seven, or 10 receptacles depending on the model:



Model 5395-3AX (100V/120V) has one NEMA L5-20R, two NEMA 5-20R, three IEC 320 C19, and 



two IEC 320 C13 receptacles.

Model 5395-3JX (200V/208V) has two NEMA L6-20R, two IEC 320 C19, and two IEC 320 C13 



receptacles.

Model 5395-3KX (230V) has eight IEC C 320 C13 and two IEC 320 C19 receptacles.



Includes intelligent IBM UPS Manager software that enhances control and manageability.



Compliant with IPv6 for future proofing IP addressing and security.  



Includes a real-time clock that enables precise shutdown and power up of systems in preferred 



sequence and time stamping on event logs to track and record specific power-related occurrences. 

Integrates with IBM Systems Director Active Energy Manager for power and thermal trending analysis 



and management.

Offers load segments allow for individual control of receptacle groups, maximizing run time for critical 



devices. 

Supports an optional network management card (part number 46M4140) for enhanced UPS 



monitoring and control.

Allows dual channel communication through the USB port and optional Network Management Card at 



the same time, which is an effective redundancy feature that maximizes communications flexibility. 

Supports an optional Extended Battery Module (EBM) for increased runtime requirements.



Includes a Remote Emergency Power Off (REPO) port to remotely power off the UPS unit to prevent 



battery operation during a power failure.

Requires a 20A (110V/120V model) or 10A (230V model) single-phase circuit.



Includes hot swap batteries for maximum uptime, availability, and ease of maintenance.



Supports an optional Environmental Monitoring Probe (part number 46M4113) for thermal 



management requirements (temperature and humidity), which requires that the Network Management 
Card be installed.

Uses Advanced Battery Management (ABM) three-stage charging technology significantly extends 



battery service life and optimizes recharge time. The three stages are:

The battery is quickly charged to 90% to make sure the UPS is prepared for the next outage.

1.

ABM finishes charging the battery with a more moderate float charge.

2.

Once the battery is charged, ABM turns the charger off, preventing the batteries from being 

3.

overcharged.