Cisco Cisco PVC2300 Business Internet Video Camera - Audio PoE 관리 매뉴얼

Wired and Wireless Modes

Cisco PVC2300 and WVC2300 Internet Video Cameras with Audio Administration Guide

32

 

This section applies to the Cisco WVC2300 camera.

After the initial configuration, you can use the camera in one of two modes: wired 
or wireless. Verify the mode you are in by viewing the LEDs. You cannot use the 
camera in both modes simultaneously. 

To switch between wired and wireless modes, see 

.

This section applies to the Cisco WVC2300 camera.

When you move the camera from a wired network to a wireless network, or vice 
versa, you must power off the camera before connecting to the new network. 

To move the camera from a wired network to a wireless network, follow these 
steps:

Unplug the power adapter from the camera.

Unplug the Ethernet network cable from the camera.

Re-connect the power adapter to the Power port on the camera. The camera’s 
Ready LED flashes while the camera is initializing. The camera is ready for use 
when the Ready and Network LEDs are solidly lit.