Cisco Cisco Video Surveillance 4000 IP Camera 릴리즈 노트

Cisco Video Surveillance IP camera firmware release 2.4.3 resolves CSCuo37288, the camera 
vulnerability to CVE-2014-0160- Heartbleed. Cisco recommends that you upgrade to this latest release.

For more information, see the 

.

Do not use the procedure in this section to upgrade your IP camera to Release 2.4.3 if the IP camera part 
number and firmware release are either of the following:

74-5461-04 or 74-5459-04 and the IP camera firmware is 2.0.0

74-5461-05 or 74-5459-05 and the IP camera firmware is 2.3.1

Instead, you must use an upgrade hot fix utility available on Cisco.com to upgrade from Release 2.0.0 
or 2.3.1 to Release 2.3.2. You can then use the procedure in this section to upgrade from Release 2.3.2 
to Release 2.4.3. For more information about upgrading your IP camera using an upgrade hot fix utility, 
see the 

.

If your IP camera part number and firmware combination is not listed above, you can use the procedure 
in this section to upgrade to Release 2.4.3. You can find the IP camera part number listed on the camera 
user interface Home window, under the General Information area.

If the firmware release on your IP camera is lower than release 1.2.1, you must first upgrade the firmware 
to 1.2.1 before you can upgrade to release 2.4.3. For more information, see the 

Release Notes for Cisco 

.

You can upgrade your IP camera to firmware 2.4.3 by using the Camera Firmware Upgrade feature in 
the VSM Management Console. For instructions, see the “Using the VSM Management Console” 
chapter in Cisco Video Surveillance Manager User Guide.

Alternatively, you can upgrade your IP camera to release 2.4.3 by performing the following steps.

Take these actions to obtain the release 2.4.3 firmware:

Go to this URL: 

Download the 2.4.3 firmware file, named CIVS-IPC-4xxx-v2.4.3-293.bin.

Log in and follow the on-screen prompts to download it to your PC.