Cisco Cisco Video Surveillance 4000 IP Camera 릴리즈 노트

Take these actions to display the Firmware window in the web interface for your IP camera:

Start Internet Explorer and enter the following in the address field:

protocol://ip_address:port_number

where:

protocol is the connection that you use for your IP camera (either HTTPS or HTTP).

ip_address is the IP address of your IP camera.

port_number is the port number that is used for HTTPS or HTTP connections to the IP camera. 
You do not need to enter a port number if you are connecting through the default HTTPS port 
443 or the default HTTP port 80.

Enter your IP camera user name and password when prompted, then click OK.

The IP Camera Main window appears.

Click the Setup link to access configuration menus for the camera.

Click Administration, then click Firmware.

The Firmware Settings window appears.

In the Firmware window, click the Upgrade button.

The Upgrade Firmware window appears.

In the Upgrade Firmware window, click the Browse button, choose the upgrade file, and then click 
Open.

The upgrade file may be stored on another PC.

Click Upgrade.

Do not power down the IP camera during the upgrade procedure.

After you upgrade the firmware, the IP camera automatically restarts. It retains all configuration 
information.

Perform the following procedure to upgrade your IP camera to Release 2.3.2 only if the IP camera part 
number and firmware release are either of the following:

74-5461-04 or 74-5459-04 and the IP camera firmware is 2.0.0

74-5461-05 or 74-5459-05 and the IP camera firmware is 2.3.1

Otherwise, use the procedure in the 

.

You can find the IP camera part number listed on the camera user interface Home window, under the 
General Information area.