Cisco Cisco Token Ring Port Adapters 설치 가이드

OL-3585-01

–

Configuration Fundamentals Command Reference

–

Security Configuration Guide

–

Security Command Reference

–

Dial Solutions Configuration Guide

–

Dial Solutions Command Reference

–

Cisco IOS Switching Services Configuration Guide

–

Cisco IOS Switching Services Command Reference

–

Wide-Area Networking Configuration Guide

–

Wide-Area Networking Command Reference

–

Network Protocols Configuration Guide, Part 1

–

Network Protocols Command Reference, Part 1

–

Network Protocols Configuration Guide, Part 2

–

Network Protocols Command Reference, Part 2

–

Network Protocols Configuration Guide, Part 3

–

Network Protocols Command Reference, Part 3

–

Bridging and IBM Networking Configuration Guide

–

Bridging and IBM Networking Command Reference

–

System Error Messages

–

Cisco IOS Software Command Summary

–

Cisco IOS Feature Guide for Release 11.3 T

•

For hardware installation and maintenance information on the Cisco 7200 series routers, refer to the
Cisco 72xx Installation and Configuration Guide that shipped with your Cisco 7200 series router.

•

For international agency compliance, safety, and statutory information for WAN interfaces for the
Cisco 7200 series routers, refer to the document Regulatory Compliance and Safety Information for
the Cisco 7200 Series Routers (Part Number 78-3419-xx; Customer Order Number
Doc-7200-RCSI=).

•

For port adapter hardware and memory configuration guidelines for the Cisco 7200 series routers,
refer to the document Cisco 7200 Series Port Adapter Hardware Configuration Guidelines
(Part Number 78-3471-xx; Customer Order Number Doc-7200PA-HCG=).

•

For release note information for the PCPA microcode, refer to the Channel Port Adapter Microcode
Release Note and Microcode Upgrade Requirements (Part Number 78-5266-xx).

•

To obtain general information about documentation, refer to the “Obtaining Documentation” section
on page 37, or call customer service at 800 553-6387 or 408 526-7208. Customer service hours are
5:00 a.m. to 6:00 p.m. Pacific time, Monday through Friday (excluding Cisco-observed holidays).
You can also send e-mail to cs-rep@cisco.com, or you can refer to the Cisco Information Packet that
shipped with your router.