Cisco Cisco TelePresence Video Communication Server Expressway
Configuring the Cisco AM GW
Cisco VCS Deployment Guide: Microsoft Lync 2010, Cisco VCS X7.2 and Cisco AM GW 1.1
Page 13 of 20
Outgoing transport
Note: this is AM GW
1.0 only
Note: this is AM GW
1.0 only
TLS
•
•
If the TLS option is not displayed, obtain the “Encryption” option for the
Cisco AM GW and update the features in the
Cisco AM GW and update the features in the
Feature management
section of the
Upgrade
page (
Maintenance > Upgrade
).
•
AM GW 1.1 uses the same transport for outgoing messages as the
transport used in the received messages.
transport used in the received messages.
4. Click Add proxy.
If the Cisco AM GW is connected to a cluster of Cisco VCSs then set up proxy entries for each Cisco
VCS peer in the cluster.
VCS peer in the cluster.
Shut down and restart the Cisco AM GW
The Cisco AM GW only needs to be shut down and restarted if the HD / SD setting on the
Resource
settings
page has been changed. If it has been changed:
1. Go to the
Shutdown
page (
Maintenance > Shutdown
).
2. Click Shutdown AM GW and then click Confirm AM GW shutdown.
A red banner will appear confirming “AM GW SHUT DOWN. Restart required”.
Note: if the confirm is not carried out immediately the system may timeout and the procedure above
will have to be repeated.
will have to be repeated.
3. Click Restart AM GW.
“AM GW RESTART IN PROGRESS” will confirm that a restart is occurring.