Cisco Cisco ASA 5512-X Adaptive Security Appliance - No Payload Encryption 설치 가이드

You are reminded to exit ASDM and save the configuration. Click OK. You exit the Upgrade tool. Note: 
You will save the configuration and reload ASDM after you upgrade the ASA software.

Repeat 

 through 

, choosing ASA from the Image to Upload drop-down list.

Click the Save icon on the toolbar to save your configuration changes.

Make both failover groups active on the primary unit by choosing Monitoring > Failover > Failover 
Group #, where # is the number of the failover group you want to move to the primary unit, and clicking 
Make Active.

Connect ASDM to the secondary unit, and upload the ASA and ASDM software according to 

 

through 

, using the same file locations you used on the active unit.

Choose Tools > System Reload to reload the secondary ASA.

A new window appears that asks you to verify the details of the reload.

Click the Save the running configuration at the time of reload radio button (the default).

Choose a time to reload (for example, Now, the default).

Click Schedule Reload.

Once the reload is in progress, a Reload Status window appears that indicates that a reload is being 
performed. An option to exit ASDM is also provided.

Connect ASDM to the primary unit, and check when the secondary unit reloads by choosing Monitoring 
> Failover > System.

After the secondary unit comes up, force the primary unit to fail over to the secondary unit by choosing 
Monitoring > Properties > Failover > System, and clicking Make Standby.

Choose Tools > System Reload to reload the (formerly) active ASA.

A new window appears that asks you to verify the details of the reload.

Click the Save the running configuration at the time of reload radio button (the default).

Choose a time to reload (for example, Now, the default).

Click Schedule Reload.