Cisco Cisco Web Security Appliance S170 사용자 가이드
38
I R O N P O R T A S Y N C O S 6 . 5 F O R W E B U S E R G U I D E
Example 2
Figure 3-4 shows a dynamic service you might create when IP spoofing is enabled and the
WCCP service shown in Figure 3-3 on page 37 is defined.
WCCP service shown in Figure 3-3 on page 37 is defined.
Figure 3-4 Example WCCP Service — Dynamic Service for IP Spoofing
In this example, the WCCP service defines a dynamic service group with service ID of 90. The
redirection basis is on the source port so it can be used for the return path with IP spoofing
enabled. Suppose in this example that you want to configure the ethernet0 interface on the
router for this service group.
redirection basis is on the source port so it can be used for the return path with IP spoofing
enabled. Suppose in this example that you want to configure the ethernet0 interface on the
router for this service group.
Use the following WCCP configuration for this example:
For more information about enabling IP spoofing when using a WCCP router, see “IP Spoofing
when Using WCCP” on page 497.
when Using WCCP” on page 497.
ip wccp version 2
ip wccp 90
interface ethernet0
ip wccp 90 redirect out