Cisco Cisco TelePresence Video Communication Server Expressway
section in this document and upload server.pem and
certnew.pem to VCS.
Loading certificates and keys onto VCS
The VCS uses standard X.509 certificates. The certificate information must be supplied to the VCS in PEM format.
Typically 3 elements are loaded:
Typically 3 elements are loaded:
■
The server certificate (which is generated by the certificate authority, identifying the ID of the certificate holder,
and should be able to act as both a client and server certificate).
and should be able to act as both a client and server certificate).
■
The private key (used to sign data sent to the client, and decrypt data sent from the client, encrypted with the
public key in the server certificate). This must only be kept on the VCS and backed up in a safe place – security of
the TLS communications relies upon this being kept secret.
public key in the server certificate). This must only be kept on the VCS and backed up in a safe place – security of
the TLS communications relies upon this being kept secret.
■
A list of certificates of trusted certificate authorities.
Note
: New installations of VCS software (from X8.1 onwards) ship with a temporary trusted CA, and a server certificate
issued by that temporary CA. We strongly recommend that you replace the server certificate with one generated by a
trusted certificate authority, and that you install CA certificates for the authorities that you trust.
trusted certificate authority, and that you install CA certificates for the authorities that you trust.
Loading a server certificate and private key onto VCS
The VCS’s server certificate is used to identify the VCS when it communicates with client systems using TLS encryption,
and with web browsers over HTTPS.
and with web browsers over HTTPS.
To upload a server certificate:
1.
Go to Maintenance > Security certificates > Server certificate.
2.
Use the Browse button in the Upload new certificate section to select and upload the server certificate PEM file.
3.
If you used an external system to generate the Certificate Signing Request (CSR) you must also upload the
server private key PEM file that was used to encrypt the server certificate. (The private key file will have been
automatically generated and stored earlier if the VCS was used to produce the CSR for this server certificate.)
server private key PEM file that was used to encrypt the server certificate. (The private key file will have been
automatically generated and stored earlier if the VCS was used to produce the CSR for this server certificate.)
—
The server private key PEM file must not be password protected.
—
You cannot upload a server private key if a certificate signing request is in progress.
4.
Click Upload server certificate data.
The certificate signing request storage location changed in X8.
When you generate a CSR in X7, the application puts csr.pem and privkey_csr.pem into /tandberg/persistent/certs.
When you generate a CSR in X8, the application puts csr.pem and privkey.pem into
/tandberg/persistent/certs/generated_csr.
/tandberg/persistent/certs/generated_csr.
If you want to upgrade from X7 and have an unsubmitted CSR, then we recommend discarding the CSR before upgrade,
and then regenerating the CSR after upgrade.
and then regenerating the CSR after upgrade.
10
Cisco VCS Certificate Creation and Use Deployment Guide