Cisco Cisco Unified MeetingPlace Audio Server 관리 매뉴얼

4-74

Cisco MeetingPlace Audio Server 5.2 Customer Engineering Guide (for Cisco MeetingPlace 8112)

OL-

Chapter 4 Configuring the 8112 Server

Configuring the system

Figure 4-76 Setting IP Address for 96 T1 CAS and 240 IP Ports

Step 7

Type the correct slot number for the blade you want to modify and press Enter. In this configuration, it
is slot 16 so type

and press Enter.

Step 8

Continue pressing Enter until you are prompted to enter the IP address as in line 15 of

Figure 4-76

Step 9

Enter the correct IP address and continue pressing Enter until you are prompted with the “blade”
configuration menu.

Step 10

Type

and press Enter to modify a blade. A prompt for the blade slot to modify appears, as shown in

line 8 in

Figure 4-76

Step 11

Type the correct slot number for the blade you want to modify and press Enter. In this configuration, it
is slot 15 so type

and press Enter.

Note

Figure 4-76

shows slot 16 but you have already configured slot 16, so you should select slot 15

now.

Step 12

Continue pressing Enter until you are prompted to enter the IP address as in line 15 of

Figure 4-76

Step 13

Enter the correct IP address and continue pressing Enter until you are prompted with the “blade”
configuration menu.

***** B L A D E C O N F I G M E N U *****

1) View blade details

2) Modify blade

x) Exit program

Enter command: 2

Enter blade slot [1..16]: 16

Type [IP]:

Card Type [TP1610-4]:

Port Group [ 1]:

Number of Ports [120]:

1st Port [ 96]:

IP address [0] [0.0.0.0]: 10.10.10.10

Subnet Mask [0.0.0.0]: 255.255.255.0

Default Gateway [0.0.0.0]: 10.10.10.1

Base UDP Port [0] [ 5000]:

Jitter Buffer Minimum Size [ 100]:

Jitter Buffer Optimization [ 7]:

IP Precedence [0]:

Type of Service (TOS) [ 0]:

DSCP / DiffServ [unused]:

RTCP Interval [default]: