Cisco Cisco Unified MeetingPlace Audio Server 관리 매뉴얼
2-4
Cisco MeetingPlace Audio Server 5.2 Customer Engineering Guide (for Cisco MeetingPlace 8106)
78-16411-01
Chapter 2 Understanding MeetingPlace Audio Server 5.2
Understanding the 8106 server and its components
•
Smart Blades — Components required to provide physical connectivity to your telephone network.
–
Smart Blade — Provides both Port Resource Card (PRC) and Master Switch Controller (MSC)
functionality in a single card.
functionality in a single card.
–
T1 Smart Blade — Provides both PRC and MSC control functionality along with the necessary
trunk interface functionality for digital T1 telephone lines. This Smart Blade also provides the
ability to connect up to four T1 spans (96 ports) using E&M wink start, loop start, and ground
start call supervision.
trunk interface functionality for digital T1 telephone lines. This Smart Blade also provides the
ability to connect up to four T1 spans (96 ports) using E&M wink start, loop start, and ground
start call supervision.
•
Multi Access Blade (MA-16) — Includes the necessary trunk interface card functionality for T1
ISDN Primary Rate Interface (PRI), E1 digital telephony, and IP-based telephony. For T1 PRI, the
MA-16 supports AT&T, Bell, and Nortel protocols. For E1, the MA-16 supports Euro ISDN and
QSIG protocols. For IP, the MA-16 supports G.711 and G.729a audio encoding. Each MA-16
requires at least one Smart Blade. The MA-16 supports up to 16 PSTN spans.
ISDN Primary Rate Interface (PRI), E1 digital telephony, and IP-based telephony. For T1 PRI, the
MA-16 supports AT&T, Bell, and Nortel protocols. For E1, the MA-16 supports Euro ISDN and
QSIG protocols. For IP, the MA-16 supports G.711 and G.729a audio encoding. Each MA-16
requires at least one Smart Blade. The MA-16 supports up to 16 PSTN spans.
•
Multi Access Blade (MA-4) — Includes the necessary trunk interface card functionality for T1
ISDN PRI, E1 digital telephony, and IP-based telephony. For T1 PRI, the MA-4 supports AT&T,
Bell, and Nortel protocols. For E1, the MA-4 supports Euro ISDN and QSIG protocols. For IP, the
MA-4 supports G.711 and G.729a audio encoding. Each MA-4 requires at least one Smart Blade.
The MA-4 supports up to four PSTN spans.
ISDN PRI, E1 digital telephony, and IP-based telephony. For T1 PRI, the MA-4 supports AT&T,
Bell, and Nortel protocols. For E1, the MA-4 supports Euro ISDN and QSIG protocols. For IP, the
MA-4 supports G.711 and G.729a audio encoding. Each MA-4 requires at least one Smart Blade.
The MA-4 supports up to four PSTN spans.
Note
If a 8106 system only uses one MA-4 for PSTN (that is, E1 or T1 PRI) in slot 1, slot 2 will
be reserved when the system ships.
be reserved when the system ships.
•
Breakout box and cables — The breakout box provides a standard RJ-45 telephony interface for E1
and T1 PRI systems. It interfaces to a maximum of 16 cables. For each MA-16 shipped with the 8106
server, we include 16 telephony cables and two trunk interface cables (50-pin Amphenol connectors)
to connect each MA-16 to the breakout box; for each MA-4 shipped with the 8106 server, we include
four telephony cables and one trunk interface cable (50-pin Amphenol connector) to connect each
MA-4 to the breakout box.
and T1 PRI systems. It interfaces to a maximum of 16 cables. For each MA-16 shipped with the 8106
server, we include 16 telephony cables and two trunk interface cables (50-pin Amphenol connectors)
to connect each MA-16 to the breakout box; for each MA-4 shipped with the 8106 server, we include
four telephony cables and one trunk interface cable (50-pin Amphenol connector) to connect each
MA-4 to the breakout box.
Note
Each 8106 server comes equipped with six slots for Smart Blades, T1 Smart Blades, or Multi
Access Blades. Each T1 Smart Blade supports 96 PSTN access ports; each MA-16 for E1
supports 480 access ports; each MA-16 for T1 PRI supports 368 access ports; each MA-16
for IP supports up to 480 access ports; each MA-4 for E1 supports 120 access ports; each
MA-4 for T1 PRI supports 92 access ports; and each MA-4 for IP supports 120 access ports.
See
Access Blades. Each T1 Smart Blade supports 96 PSTN access ports; each MA-16 for E1
supports 480 access ports; each MA-16 for T1 PRI supports 368 access ports; each MA-16
for IP supports up to 480 access ports; each MA-4 for E1 supports 120 access ports; each
MA-4 for T1 PRI supports 92 access ports; and each MA-4 for IP supports 120 access ports.
See
.
Table 2-3
Blade and Port Information
Blade
Number of Access Ports
Supported
Supported
T1 Smart Blade
96
MA-16 for E1
480
MA-16 for T1 PRI
368
MA-16 for IP
480
MA-4 for E1
120
MA-4 for T1 PRI
92