Cisco Cisco WAP121 Wireless-N Access Point with Single Point Setup 관리 매뉴얼

Download/Backup Configuration File

Cisco Small Business WAP121 and WAP321 Wireless-N Access Point with PoE

45

The WAP device configuration files are in XML format and contain all the 
information about the WAP device settings. You can back up (upload) the 
configuration files to a network host or TFTP server to manually edit the content or 
create backups. After you edit a backed-up configuration file, you can download it 
to the access point to modify the configuration.

The WAP device maintains these configuration files:

•

Startup Configuration—The configuration file saved to flash memory. 

•

Backup Configuration—An additional configuration file saved on the WAP 
device for use as a backup. 

•

Mirror Configuration—If the Startup Configuration is not modified for at 
least 24 hours, it is automatically saved to a Mirror Configuration file. The 
Mirror Configuration file is a snapshot of a past Startup Configuration. The 
Mirror Configuration is preserved across factory resets, so it can be used to 
recover a system configuration after a factory reset by copying the Mirror 
Configuration to the Startup Configuration.

In addition to downloading and uploading these files to another system, you can 
copy them to different file types on the WAP device. See 

To back up (upload) the configuration file to a network host or TFTP server:

Select Administration > Download/Backup Configuration File in the navigation 
pane.

Select Via TFTP or Via HTTP/HTTPS as the Transfer Method.

Select Backup (AP to PC) as the Save Action.

For a TFTP backup only, enter the Destination File Name with an .xml extension. 
Also include the path where the file is to be placed on the server and then enter 
the TFTP Server IPv4 Address.

The filename cannot contain the following characters: spaces, <, >, |, \, : , (, ), &, ; , #, 
? , *, and two or more successive periods.

For a TFTP backup only, enter the TFTP Server IPv4 Address.