Cisco Cisco WAP121 Wireless-N Access Point with Single Point Setup 관리 매뉴얼

Configuration Files Properties

Cisco Small Business WAP121 and WAP321 Wireless-N Access Point with PoE

47

If the downloaded file overwrites the Startup Configuration file, and the file passes 
a validity check, then the downloaded configuration takes effect the next time the 
WAP device reboots.

Click Save to begin the upgrade or backup. For HTTP downloads, a window 
appears to enable you to browse to select the file to download. When the 
download is finished, a window indicates success.

Ensure that power to the WAP device remains uninterrupted while the configuration 
file is downloading. If a power failure occurs while downloading the configuration 
file, the file is lost and the process must be restarted. 

The Configuration Files Properties page enables you to clear the Startup or 
Backup Configuration file. If you clear the Startup Configuration file, the Backup 
Configuration file becomes active the next time that you reboot the WAP device. 

To delete the Startup Configuration or Backup Configuration file:

Select Administration > Configuration Files Properties in the navigation pane. 

Select the Startup Configuration, or Backup Configuration file type.

Click Clear Files.

The Copy/Save Configuration page enables you to copy files within the WAP 
device file system. For example, you can copy the Backup Configuration file to the 
Startup Configuration file type, so that it is used the next time you boot up the 
WAP device.

To copy a file to another file type: