Cisco Cisco WAP121 Wireless-N Access Point with Single Point Setup 관리 매뉴얼

4

Cisco Small Business WAP121 and WAP321 Wireless-N Access Point with PoE

57

This chapter describes how to configure the port, network, and clock settings of 
the WAP devices.

It includes these topics:

•

•

•

The Port Settings page enables you to view and configure settings for the port 
that physically connects the WAP device to a local area network.

To view and configure LAN settings:

Select LAN > Port Settings in the navigation area.

The Operational Status area shows the type of port used for the LAN port and the 
Link characteristics, as configured in the Administrative Settings area. If the 
settings change through configuration or auto negotiation, you can click Refresh to 
show the latest settings.

Enable or disable Auto Negotiation.

•

When enabled, the port negotiates with its link partner to set the fastest link 
speed and duplex mode available.

•

When disabled, you can manually configure the port speed and duplex 
mode.

If autonegotiation is disabled, select a Port Speed (10/100 Mb/s for the WAP121, 
and 10/100/1000 Mb/s for the WAP321) and the duplex mode (Half- or Full-
duplex).