Cisco Cisco TelePresence Video Communication Server Expressway
Configuring the Cisco AM GW
Cisco VCS Deployment Guide: Microsoft OCS 2007 R2, Lync 2010, Cisco VCS X7.0
and Cisco AM GW 1.0, 1.1
and Cisco AM GW 1.0, 1.1
Page 16 of 30
<other parameters>
As required
3. Click Apply changes.
Note: some endpoints and network equipment do not support as many codecs as the Cisco AM GW
can offer. For best interoperation it is recommended that at least one audio codec is left unselected in
the Audio codecs from AM GW and Audio codecs to AM GW sections.
can offer. For best interoperation it is recommended that at least one audio codec is left unselected in
the Audio codecs from AM GW and Audio codecs to AM GW sections.
Resource settings
1. Go to the
Resource settings
page (
Settings > Resource settings
).
2. Configure the fields as follows:
Call capability
Allow HD – supports high definition video calls at up to 720p at 30fps
SD only – supports calls at up to w448p at 30fps
The number of calls supported in the selected mode is shown. This depends on
the model of AM gateway you are using.
SD only – supports calls at up to w448p at 30fps
The number of calls supported in the selected mode is shown. This depends on
the model of AM gateway you are using.
3. Click Apply changes.