Cisco Cisco TelePresence Video Communication Server Expressway
Configuring the Cisco AM GW
Cisco VCS Deployment Guide: Microsoft OCS 2007 R2, Lync 2010, Cisco VCS X7.0
and Cisco AM GW 1.0, 1.1
and Cisco AM GW 1.0, 1.1
Page 17 of 30
Note: if this setting is changed the Cisco AM GW will need to be shut down and restarted (see ‘Shut
down and restart the Cisco AM GW’ on page 18).
down and restart the Cisco AM GW’ on page 18).
Time
1. Go to the
Time
page (
Settings > Time
).
2. Configure the fields as follows:
Enable NTP
Select this option
UTC offset
Configure as required for local time zone
NTP host
IP address or DNS name of NTP (time) server
3. Click Update NTP settings.
Proxies
1. Go to the
Proxies
page (
Proxies > Proxies
)
2. Click Add new proxy.
3. Configure the fields as follows:
Name
Descriptive name (for display purposes only)
Address
VCS in B2BUA mode: IP address of Cisco VCS:65080
(65080 is the default “Port on B2BUA for transcoder communications” as
configured on VCS.)
(65080 is the default “Port on B2BUA for transcoder communications” as
configured on VCS.)