Cisco Cisco TelePresence Video Communication Server Expressway
Endpoint configuration
(those that can initiate a Multiway™ conference)
xconfiguration Multipoint MultiwayStartupPeriod: 0..21
Defines the delay before audio and video is enabled after connecting to the MCU, . By using
a small number it reduces messages/sounds occurring as all 3 participants join the
conference.
a small number it reduces messages/sounds occurring as all 3 participants join the
conference.
If MXP F8.1 code and SIP calling is used, either the connection from the MXP to the MCU must
support secure connection, or the MXP must have Security > Encryption set to Off. If set to On or
Auto, the MXP will demand a secure connection from the MCU. If any link between the MXP and MCU
is TCP (rather than TLS) security cannot be supported and the Multiway™ Join will fail for this party.
support secure connection, or the MXP must have Security > Encryption set to Off. If set to On or
Auto, the MXP will demand a secure connection from the MCU. If any link between the MXP and MCU
is TCP (rather than TLS) security cannot be supported and the Multiway™ Join will fail for this party.
MXP F8.0 can have encryption either set to Off or Auto
MXP F8.1 can have encryption either set to Off or Auto, but if Auto, then a secure link to the MCU
must be available.
must be available.
MXP F8.2 and later can have encryption either set to Off or Auto.
MXP – L Series
L Series currently do not support initiating Multiway™ calls.
Cisco VCS Deployment Guide: Multiway™ (Cisco VCS X5)
Page 15 of 25