Cisco Cisco TelePresence Video Communication Server Expressway
Optional configuration steps
Step 14: Logging server configuration (Optional)
The following configuration will enable event logs to be sent to an external logging server (using the
SYSLOG protocol).
SYSLOG protocol).
The Log level controls the granularity of event logging. 1 is the least verbose, 4 the most.
A minimum log level of 2 is recommended, as this level provides both system and basic signaling
message logging.
message logging.
Note: Cisco VCS Expressway external logging server configuration requires additional firewall /
NAT configuration – See Appendix 3 – NAT & firewall configuration.
NAT configuration – See Appendix 3 – NAT & firewall configuration.
To configure a Logging server:
1. Go to the Logging page (System configuration > Logging).
2. Configure
the
Remote syslog server IP address field as follows:
Cisco VCS Control
Cisco VCS Expressway
Remote syslog server
Enter 10.0.0.13
Enter 10.0.0.13
Log level
Select 2
Select 2
3. Click
Save.
Cisco VCS Deployment Guide: Basic Cisco VCS configuration – Cisco VCS Control with
Cisco VCS Expressway
Cisco VCS Expressway
Page 33 of 44