Cisco Cisco TelePresence Video Communication Server Expressway
14. Click Save.
To the right of the Peer 1 IP address field the words “
This system
” should appear (though this may
require the page to be refreshed before they appear).
15. Restart the VCS (go to
Maintenance > Restart options
, then click Restart and confirm OK).
After the restart, on the master VCS web interface:
1. Check that configuration data exists as expected:
l
If FindMe is in use, check that the expected FindMe entries still exist (
Status > Applications > TMS
Provisioning Extension Services > FindMe > Accounts
).
l
Check configuration for items from the
System
,
Configuration
and
Application
menus.
2. Backup the VCS (
Maintenance > Backup and restore
).
On other devices:
If you have any other VCSs neighbored (or connected via a traversal zone) to this master VCS peer, ensure
that their zone configuration for this cluster is updated to only include the address of this master VCS.
that their zone configuration for this cluster is updated to only include the address of this master VCS.
On this master VCS peer:
1. Log in to the web browser of this VCS.
2. Go to
Status > Alarms
.
If there is an alarm that the VCS must be restarted, go to
Maintenance > Restart options
and then click
Restart.
3. If the VCS did not need to be restarted, ensure that maintenance mode is disabled.
a. Go to
Maintenance > Maintenance mode
.
b. Set Maintenance mode to Off.
c. Click Save.
c. Click Save.
After the master peer configuration
Go to
Status > Alarms
and ensure that all alarms are acted upon and cleared.
Cisco TelePresence VCS Cluster Creation and Maintenance Deployment Guide (X8.5)
Page 11 of 49
Setting up a new cluster of VCS peers