Cisco Cisco DWDM Transceiver Modules 설치 가이드

Connect the single pair fiber-optic cables from the CWDM GBIC transceivers or CWDM SFP 
transceivers (Tx/Rx; up to eight channels) to the 8-channel multiplexer/demultiplexer module equipment 
connectors (Tx/Rx; up to eight wavelengths). 

CWDM GBIC transceivers are equipped with SC connectors. To make connections to the LC 
connectors on the multiplexer/demultiplexer device, you must use an LC to SC patch cable 
(Cisco part number CAB-SM-LCSC-1M= [1 meter cable], CAB-SM-LCSC-5M= [5 meter 
cable], or an equivalent patch cable).

Connect the Tx ports to the Rx ports and the Rx ports to the Tx ports to ensure that the system 
operates correctly.

Connect the network backbone single pair fiber-optic cable to the multiplexer/demultiplexer 
NETWORK connector on the OADM module.

If you are planning to monitor your network with an optical power meter or an optical spectrum analyzer, 
connect your meter or analyzer to the MONITOR port on the OADM.

 lists the environmental specifications for the CWDM OADM and multiplexer/demultiplexer 

modules. 

 lists the optical specifications for the CWDM OADM and multiplexer/demultiplexer 

modules.

Dimensions

8.35 x 1.75 x 8.7 in. (212 x 44 x 221 mm)

Weight

1.5 lbs. (0.68 kg)

Operating temperature

32 to 140 ºF (0 to 60ºC)

Storage temperature

-40 to 185ºF (–40 to 85ºC)