Cisco Cisco DWDM Transceiver Modules 설치 가이드
5
Installation Notes for the Cisco TwinGig and OneX Converter Modules
78-17572-04
OneX Overview
Figure 2
Cisco OneX Converter Module
The converter module supports one small-form factor pluggable plus (SFP+)
module. The module plugs into the converter module slot to establish fiber-optic
and copper connections to network devices.
module. The module plugs into the converter module slot to establish fiber-optic
and copper connections to network devices.
lists the SFP+ modules that
the converter module supports.
Note
Use only Cisco SFP+ modules in the converter module. Each Cisco module has
an internal serial EEPROM that is encoded with security information. This
encoding provides a way for Cisco to identify and validate that the module meets
the requirements for the switch.
an internal serial EEPROM that is encoded with security information. This
encoding provides a way for Cisco to identify and validate that the module meets
the requirements for the switch.
1
Latch arms
2
SFP+ slot
3
Top of the converter module
274039
3
1
2
Table 3
Supported SFP+ Modules and Patch Cords
SFP+ Module Number Description
SFP-10G-SR
Cisco 10GBASE-SR SFP-Plus transceiver module for
MMF, 850-nm wavelength
MMF, 850-nm wavelength
SFP-H10GB-CU1M
Twinax cable assembly, 1m, 30 AWG