Cisco Cisco Unified MeetingPlace 6.0 빠른 설정 가이드
Configuring Cisco Unified MeetingPlace Directory Service
How to Configure Cisco Unified MeetingPlace for Directory Service
24
What To Do Next
Proceed to the
.
Modifying Directory Service Filters and Applying the Filters to Previously Imported Directory
Service User Profiles
Service User Profiles
Complete this procedure only if you need to modify existing user group or time zone filters and apply
those filters to Directory Service user profiles that have already been imported to Cisco Unified
MeetingPlace.
those filters to Directory Service user profiles that have already been imported to Cisco Unified
MeetingPlace.
Procedure
What To Do Next
Proceed to the
.
Assigning Profile Numbers to Directory Service Users
By default, the system assigns the Telephone Number field entry in Cisco Unified
Communications Manager as the
Communications Manager as the
for each Directory Service user.
Before You Begin
•
This configuration option was introduced in Release 7.0.2.
•
If you have multiple Application Servers for multiple sites or for
, then
perform this task on only one active Application Server.
Procedure
Step 1
Log in to the Cisco Unified MeetingPlace Administration Center.
Step 2
Select User Configuration > Directory Service > Directory Service Configuration.
High-Level Task
Details
Step 1
Delete the user profiles from
Cisco Unified MeetingPlace.
Cisco Unified MeetingPlace.
Complete one of the following tasks:
•
in the
module
•
in the
module
Step 2
Configure the Directory Service
filters for user groups.
filters for user groups.
Complete one or both of the following tasks:
•
•
Step 3
Import the user profiles from
Cisco Unified
Communications Manager.
Cisco Unified
Communications Manager.
1.
Go to the
2.
Check
3.
Check
4.
Select