SINGER SEQS-6000 FUTURA QUARTET 지침 매뉴얼

1.  Turn hand wheel counter clockwise (toward you) until the 

needle comes to its highest position.

1.  Raise  presser  foot  and  needle,  and  push  up  lever  (A)  of 

embroidery foot with your finger and pass embroidery hoop 

under it.



  To  remove,  pull  the  hoop  forward  to  slide  it  out  from 

underneath the embroidery foot.

2.  Slide the hoop onto the embroidery unit from front to back 

until it clicks into place.



  To  remove,  press  the  release  lever  and  slide  the  hoop 

towards you.

NOTE: Before attaching small hoop, turn on power switch to 

move the carriage to embroidering standby position.

(A)

Hoop release lever

Carriage

Hoop mounting plate