SINGER SEQS-6000 FUTURA QUARTET 지침 매뉴얼

EMBROIDERY UNIT IS ATTACHED
OPERATION SWITCHES

          LED INDICATOR


  Green light indicates machine is ready to start.



  Red light indicates machine is operating.



  Flashing red light indicates a problem or an error.

     * Flashing  for  2  -  3  seconds  shows  that  an  incorrect 

operation was made.

     * Continuous  flashing  indicates  that  the  machine 

malfunctions.

When start/stop button is pushed, machines starts slowly. To 

stop the machine, push the button again and the machine will 

stop sewing and the needle stops at its highest position.

          FORWARD STITCH BUTTON
After  the  embroidery  design  has  been  transferred  to  the 

machine,  the  embroidery  can  be  advanced  one  stitch  at  a 

time. Note: The embroidery hoop will move as it is advancing 

To advance continuously, press and hold this button.

          REVERSE STITCH BUTTON
To  back  up  through  a  design  that  is  already  in  progress, 

press the Reverse Stitch button. Pressing the button once will 

reverse  one  stitch  at  a  time. To  reverse  continuously,  press 

and hold this button. Design may be reversed all the way back 

to the first stitch of the design.

Reverse stitch button

Forward stitch button

Start/stop button

(For embroidery only)

LED indicator



THREAD TENSION CONTROL 

Set it at “

E” for embroidery to loosen thread tension.

You may wish to re-adjust thread tension according to the type 

of fabric and thread being used.

NOTE: When sewing designs created by the software for 

Photo  Stitch  (optional)  it  is  recommended  to  decrease 

the  thread  tension  toward  “0”  and  activate  the  “Speed 

limiter”, by checking the box in Machine navigator, before 

sending the design to the machine. This ensures the best 

performance of the machine.