Cisco Headend System Release 2.7 릴리즈 노트
Edit the .profile File
4019475 Rev D
81
Setting SSP 2.3 Compliance
1 If necessary, open an xterm window on the DNCS.
2 To set the export/home/dncs directory as the working directory, type cd
/export/home/dncs and then press Enter.
3 Open the .profile file using the text editor of your choice. Look for an entry in the
.profile file similar to the following example:
export DNCS_DRM_INCLUDE_HE_RSR_VOD=1
export DNCS_DRM_INCLUDE_HE_RSR_VOD=1
4 Is the DNCS_DRM_INCLUDE_HE_RSR_VOD variable present in your .profile
file?
a If yes, continue to step 6.
b If no, continue to step 5.
a If yes, continue to step 6.
b If no, continue to step 5.
5 Do you need SSP 2.3 compliance to be enabled?
a If yes, continue to step 7.
b If no, continue to step 9.
b If no, continue to step 9.
6 The DNCS_DRM_INCLUDE_HE_RSR_VOD variable can be set to enabled or
disabled.
If export DNCS_DRM_INCLUDE_HE_RSR_VOD=0 then SSP 2.3 is enabled.
If export DNCS_DRM_INCLUDE_HE_RSR_VOD=1 then SSP 2.3 is disabled.
Is the DNCS_DRM_INCLUDE_HE_RSR_VOD variable set to the correct value?
a If yes, continue to step 7.
b If no, continue to step 8.
a If yes, continue to step 7.
b If no, continue to step 8.
7 You are finished. Exit the text editor.
8 Add the # character in front of the DNCS_DRM_INCLUDE_HE_RSR_VOD
8 Add the # character in front of the DNCS_DRM_INCLUDE_HE_RSR_VOD
variable setting as in the following example:
#export DNCS_DRM_INCLUDE_HE_RSR_VOD=1
9 Set the SSP 2.3 compliance:
a If you need to disable SSP 2.3 compliance type
export DNCS_DRM_INCLUDE_HE_RSR_VOD=1
b If you need to enable SSP 2.3 compliance typ
export DNCS_DRM_INCLUDE_HE_RSR_VOD=0
10 Save the changes to the .profile file.
11 After making these changes, bounce (stop and restart) the DRM as shown in
11 After making these changes, bounce (stop and restart) the DRM as shown in
Bouncing the DRM Process (on page 81).